KEY FEATURES --------------- * Create multiple configuration files You can create multiple configuration files and switch them at any time. For example, create one config for a game, and create another one for web browsing. JoyToKey also supports the automatic switching of an active configuration file when the target application changes By default, configuration files (JoyToKey.ini and profiles) are stored in either JoyToKey folder under user's Document folder (if installed from installer) or in the same folder as JoyToKey.exe is placed (if installed from zip file) Besides, when you launch JoyToKey, you can pass a profile as a command line argument In Windows Explorer, right-click the file ThePIt.cfg (extensions need to be visible or it will just say ThePit) and select Open With and choose notepad. 8). Copy the contents of the JoyToKey Config detail from the Guide into this file. 9)
Starting from JoyToKey version 6.3, configuration data is by default stored in user's Documents/JoyToKey folder. But in case you have an older version, or installed it from a zip archive file, configuration files are saved in the same folder as JoyToKey.exe. In that case, the installed folder must be write-able Save file to C:\YOURUSERNAME\Documents\JoyToKey.The folder will already have some JoyToKey files in it. The next time you use JoyToKey, the new profile will be there. You can always edit them to suit your needs. I am not affiliated with the software JoyToKey, I just think it's silly that there is no repository for users to share game profiles .cfg files in your JoyToKey folder. If you don't have JoyToKey yet, here's the site: . The configs are always up-to-date, my configs are Installation - Once JoyToKey is installed move the entire thing to DOCUMENTS FOLDER from download just to be sure it does not get deleted by accident- Not Necessary, but recommended. Place these configuration files in your JoyToKey folder wherever it may be and REPLACE ALL It might have been a version difference problem with the config file or something, so the OP isn't trying to hurt anybody. This tool seems better than the one I found for minecraft specifically. We did find movement to be a bit wonky, but that might be a factor of needing fine-tuning on the settings
Navigate to where you joytokey exe is located and launch it It will launch with a default profile call profile 1. Configure this profile the same as you did for HyperSpin above and then press file, save. This will put a Profile 1.cfg in the same folder as your exe file Start JoyToKey In the right panel, double click Button 1 row. Press 'A' key and it'll be assigned to the button, and click OK
Starting from JoyToKey version 6.3, user configuration data is stored in your Documents/JoyToKey folder by default. This change was made to avoid unnecessarily hassles where users could not locate the configuration files or could not save them properly due to folder permission issues There are, however, 2 other files -- a BAT file for killing the JoyToKey process and a shortcut that gives that BAT file ADMIN privileges. Place the BAT and LNK files in your root Hyperspin directory and use the JoyToKey.exe as the startup program and JoyToKeyKill.lnk as a shutdown program in the HyperHQ UI
Page 1 of 2 - JoyToKey Profile - Xbox 360 or Xbox One Controller - posted in File topics: JoyToKey Profile - Xbox 360 or Xbox One Controller Just a quick little profile I made for JoyToKey, purely to make it a little more enjoyable for anyone coming from Skyrim back to Oblivion but wanting to use a controller $config = path to joytokey configuration file (e.g. c:\joytokey\game.cfg So, once you've downloaded JoyToKey, you should extract the files (Using 7Zip or WinRAR) into your main Oblivion folder. This folder should be located at This PC > OS (C:) > Program Files (x86) > steam > steamapps > common > Oblivion if you downloaded it from Steam I share here an Excel tool I made that helps creating JoyToKey config files for different systems. With this tool, you can configure JoyToKey profiles for up to 12 systems and 6 pairs of physical controllers for each system. It semi-automates the process, preparing the text for the cfg files
Create multiple configuration files; You can create multiple configuration files and switch them at any time. For example, create one config for a game, and create another one for web browsing. JoyToKey also supports the automatic switching of an active configuration file when the target application changes. Assign multiple keys for each butto JoyToKey is a neat tool that allows you to turn your joystick into a PC controlling device with minimal fuss. You can create several configuration files and easily load the one you need: simply press the button you assigned for the 'Switch to the other configuration file' feature Hi! I share here an Excel tool I made that helps creating JoyToKey config files for different systems. With this tool, you can configure JoyToKey profiles for up to 12 systems and 6 pairs of physical controllers for each system. It semi-automates the process, preparing the text for the cfg files. I have a cab with 2 Ultimarc U360s (each one as a joystick with 8 buttons), and I also have. . no matter if you delete the game or whatever all you have to make sure is the game is set on completely default values. no setup needed or wanted. T. tuteja1986 Diamond Member. Jun 1, 2005 3,676 0 0. Jan 16, 2006 #1
Setting Up JoyToKey. Download JoyToKey; Unzip the file; Copy each configuration into the JoyToKey directory that you just created; Open JoyToKey; The configurations should appear in the left panel. Using Configurations. Once you have paired your JoyCons, and setup JoyToKey, do the following. Select the configuration in JoyToKey This config was meant for PS4 controller, but it also works fine with a PS3 controller Start and Select button are PS3/PS2 only so you can even bind more things. ????? ????? Files gmod-hl2_car_driving.rar 2 It is [numpad *] on the keyboard. I chose car look behind over sub mission on the R3 (right stick button). You can actually set the two on the same, there's no conflict, that is just a personal choice I made for my config. I created the JoyToKey config file with JoyToKey ver 5.0 beta. The gta_sa.set file is created with GTA SA 1.01 RogePost File Hosting Service : Azerty Config.cfg Put the file in the same directory as your JoyToKey.exe and you're set. Great emu btw, amazing work for a first beta ! I have a AZERTY keyboard so, if you are QWERTY, you only have to change the mapping of Button 4 from W to Z
Open JoyToKey.exe and use Settings (S) > Associate profiles with applications (A) to link the three config files to their corresponding game.exes Things to remember:1) If the game pad that you are utilizing is wireless, make sure it is powered on before you start JoytoKey2) If your game pad is a usb wi.. Just put them with your other JoyToKey config files to use them. Also if anyone knows how I can put that list of controls in a spoiler to clean this post up, that would be appreciated. 1 comment. share. save. hide. report. 100% Upvoted. This thread is archived. New comments cannot be posted and votes cannot be cast. Sort by. best. level 1
http://joytokey.net/en/downloa JoyToKey has had 2 updates within the past 6 months. It also supports the automatic association with target applications so that the config file will switch automatically when the target. I tried the Tastk Manager method, and the first method. I didin't see JoyToKey in the Task Manager in the start uip items, and the other method is confusing. I opened Windows Explorer and clicked the box hidden items in the menu, but it didnt show me the same photo that is shown in the instructions Hit the Download button and save the file to a location on your machine. The download is zip file containing a downloader for JoyToKey. Unzip the file in a location where you want to keep the software (Maybe create a folder in your program files to keep it with other installed software?
The batch file will kill joytokey if it's running before loading it with the new config, this allows for a adjustable pause before continuing. Setting up this file for each game is easy, just change _home= to reflect the config folder you want to use, then save the batch file using the same name JoyToKey is a practical option to control gamepad/ joystick on your PC running Windows 7, 8.1 or 10. It supports a wider range of configurations and allows you to customize the settings. It can also be used to configure and use your gaming console controllers (including PS2, PS3, PS4, Xbox 360 and Nintendo Remote Wii controllers) on your computer JoyToKey also supports the automatic switching of an active configuration file when the target application changes. Assign multiple keys for each button For example, you can assign a combination of Alt+F4 for one joystick button
How do I configure JoyToKey to work in Morrowind? - posted in Morrowind Technical Support: I have attempted to configure my XBOne controller to work in Morrowind.exe from the KeyToJoy app. Basically I want it so that I can look up and down with the left analog stick (once I get the idea of that I know I can get the rest) I can get the joysitck to work as a mouse in explorer but not in. http://joytokey.net/en/download I have updated my X360 config (30/10/2017) file that should cover all buttons (unless i missed somthing) and i believe only 2 or 3 buttons have to be changed from the default key bindings. The configs list the relevent pad buttons and their function as well as Combo Keys (for the extra buttons anyone know if this is possible?... A Call of Duty: Modern Warfare 2 (COD:MW2) Forum Thread in the Other/Misc category, submitted by Elion
I have everything; the .cmd files and JoyToKey in the emulator's folder. it has the required functionality built into it now. Use an Advanced Emulator config. Click the help in config for more info, and look at one of the ones provided for example. Cheers. Share this post. Link to post Share on other sites ENABLE ANNOTATIONS!JoyToKey config file - https://mega.nz/#!7x9DQCrA!TFrszrzJ8I9XyPTxzxJ9aRIm5rvg9uUeJtKT2jAYHZ4JoyToKey - http://joytokey.net/en/downloadSCP..
Support files There are various support files used by GameEx which deserve a lot of the credit. The support files along with some other useful downloads are outlined below and you can get the latest versions from the sites listed. history.dat MAME Game information and history Take a look through the ddraw.cfg file to see if there's anything else you'd like to tweak for your unique setup. The button configuration I came up with is based on my own personal preferences. Feel free to use JoyToKey to modify it as desired The configuration includes 32 buttons, 6 axes and 2 Point of View (POV) switches for each of the joysticks. Insofar as the mouse emulation is concerned, JoyToKey can handle both buttons and wheel That tip appears very useful, since my joytokey configuration file inputs 2-3 different keys at once for some of the buttons. I understand that some motherboards play a beep due to the input of multiple keys at once, but I can't figure out why it would do that for one of the analog sticks. I went ahead and updated the guide with your suggestion Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time
The attached Config.zip file contains 2x configuration files for the JoyToKey utility software, which is linked below. Having come from a background where I had always been very productive with using a computer mouse, I reached the stage where I became crippled - and just filling in a simple online form became extremely challenging 2: Rename the text file to robocraft or whatever you want and save it in the same folder as JoyToKey.exe. 3: Change the file extension of your text file to .cfg and save again. 4: Start/Restart JoyToKey and your file should be listed as a control scheme in the list on the left The program has also a feature for automatically assigning a configuration file with a program, so a certain configuration turns on automatically once you launch a specific program. Since numerous browser games are difficult to handle when it comes to steering, JoyToKey allows to enjoy the game freely and fully
The user YM2612 has an updated config file for version 0.173, which is the one I'm using also for 0.182. In reply #22 the file is attached. Remember to edit your mame.ini and set for the ctrlr entry the same as the config file name without extension Then download the files here and put the cfg. file in the JoyToKey folder. Then install ControlMK and put the pro. file into the ControlMK folder. Then run ControlMK. In ControlMK select the Xbox 360 gamepad in Controllers Found, Then in activate controllers select the Xbox 360 Gamepad. I've tinkered my own config a lot compared to yours.
With JoyToKey you will be able to control with joysticks any application that doesn't support joystick input (even Word, Exceletc.). Features: - Configuration is provided for maximum 16 joysticks (eachjoystick will have 6 axes, 2 POV switches and 32 buttons). - Multiple configuration files can be created and used at any time JoyToKey enables you to control many softwares (like web games, browsers, office applications or even Windows itself) by using your favorit
JoyToKey tutorial, configuration, config files? Here is a small tutorial that will help you to use a controller with any PC game. It doesn't matter which brand your controller is, Logitech, Speedlink, Hama etc. What you need is a third party software called JoyToKey Place the BAT and LNK files in your root Hyperspin directory and use the JoyToKey.exe as the startup program and JoyToKeyKill.lnk as a shutdown program in the HyperHQ UI. Using the LNK shortcut file allows for Administrator privileges with the CMD prompt window. You may need to create your own shortcut but I've included it for completeness JoyToKey Configurations for various games by Konjak. These are configuration files that allow games made by Konjak to be played with a controlle JoyToKey (or Joy2Key) enables PC game controllers to emulate the keyboard and mouse input, so that windows applications and web games can be controlled with your favorite joysticks! Whenever joystick buttons and sticks are pressed, JoyToKey converts them into keyboard strokes and/or mouse movements so that the target application will work as if.
You can also get the Optishot Configuration file HERE That way you don't need to configure the buttons later Unzip the .cfg file into the folder you made in your Documents directory for the JoyToKey program. The files should look like the image below. For Windows and JoyToKey from the CD Copy the JoyToKey_en folder from the CD to your computer I use a XBOX 360 wired controller, but this should work with other similar controllers. Left stick - Move Right stick - Look LB & RB - Cycle thru hotbar a,b,x,y - 1,2,3,4 hotbar keys D-pad - 5,6,7,8 hotbar keys Left Tigger - Left mouse Right Trigger - Right mouse Left Stick Click - Spacebar Right Stick Click - F5 Back - Tab(i use this for inventory) Start - Es Go to File > Open Config Data Folder in Explorer. Then, completely exit out of JoyToKey. Sometimes hitting the x doesn't work as it will just minimize to your tray, so make sure to do File > Exit to ensure that it is closed. In the file folder that you opened in the previous step, locate your Royal
You can select a keybinding profile for your peripherals (joysticks, mouse, keyboard, rudder, etc) through the Options and Advanced Keybindings. As you modify and update your keybindings, you can create these profiles. You can use the export and import options to create files for saving, sharing, and modifying on the fly 5. Configuration files are not saved properly and I have to re-configure it every time By default, configuration files are saved in the same folder as JoyToKey.exe. Therefore, the folder you installed JoyToKey.exe needs to be write-able. Please follow the steps below and double check that folders and configuration files are NOT marked as. You can switch to and activate the other configuration file with the button which is assigned to this function. * Use the setting of other joystick number temporarily function (Something like shift command of SNESKey
Re: Release: JoyToKey 5.8.2 for future postings DON'T password the files and ONLY use sbupload.com PLEASE FIX ALL YOUR POSTS YOU HAVE MADE OR I WILL BE FORCED TO DELETE THEM !!!! JoytoKey a Joystick Emulator on the Windows platform << Go to Joystick emulators list. This software is a keyboard emulator for joysticks. It converts joystick input into keyboard input (and mouse input). Use it when you want to control an application with joysticks that doesn't support joystick input In JoyToKey to create a new configuration, just click on Create, choose the joystick button from a list and click on Enter, as the configuration file (CFG) is a normal text file. This program is very easy to download, install and then use, through its friendly and intuitive user interface Install the software that comes with your controller first. Then download JoyToKey and ControlMK. Then download the files here and put the cfg. file in the JoyToKey folder. Then install ControlMK and put the pro. file into the ControlMK folder
- Configuration is provided for maximum 16 joysticks (eachjoystick will have 6 axes, 2 POV switches and 32 buttons). - Multiple configuration files can be created and used at any time. - Function for shooting buttons automatically. - Mouse can be emulated JoyToKey; In this article we shall demonstrate Xpadder. Download and install the software. Connect your Joystick and make sure that it is detected/recognized by your PC. Run the software. A window will then appear: Click on the joystick icon in the upper left. A new window will appear: Go to the Image tab (step not required) It is also known as a Convert joystick input to keyboard/mouse input file (file extension EXE), which is classified as a type of Win32 EXE (Executable application) file ; JoyToKey enables PC game controllers to emulate a mouse and the keyboard input, so that.. JoyToKey is an application written by Vector Inc I've tried to make a .bat file that simply runs both of them at the same time, but for some reason JoyToKey won't load with a config file when doing this. My reasoning for doing this is that I run Isaac on my living room HTPC (which runs XBMC) and want running it as simple as possible. 5 comments. share. save. hide
Change the location of configuration files // Edition Statement // AppNee provides the JoyToKey portable full registered versions for Windows 32-bit & 64-bit. // Prompts // Make sure the name of folder and JoyToKey containing JoyToKey have no special characters, such as . Use File/Exit to close progra Also, it does NOT show up under the installed programs list in the Control Panel (neither does JoyToKey). Just another reason I don't believe it does anything in the background when it is not running. It's only purpose is to make changes to the configuration of the stick or throttle, save and download them into the hardware -rcfile Sets the rc file to look in. -config Reads in a config in an rc file. FILES /dev/js The joystick driver. Must be installed for joy2key to work. Joy2key only supports versions 1.0+ of the joystick driver. Older versions of joy2key use the 0.8.0 joystick driver. If for some reason a 1.0+ joystick driver does not work for you, use. Hi! I share here an Excel tool I made that helps creating JoyToKey config files for different systems. With this tool, you can configure JoyToKey profiles for up to 12 systems and 6 pairs of physical controllers for each system. It semi-automates the process, preparing the text for the cfg files For example, the red circle one from Properties is the same as button one in JoyToKey; the red circle two is the same as button two; and so fore. Following the instructions, I create a new configuration file called Doom3 which is illustrated below
Download JoyToKey here (yes the website is very plain, but its a handy and simple program to have) Download customized JoyToKey config file here (right click, save as, OR find the.ZIP here). Add this Binding of Isaac JoytoKey config file by simply copying it into the same folder as JoyToKey (for example C:\Program Files\JoyToKey\ Then download JoyToKey and ControlMK. Then download the files here and put the cfg. file in the JoyToKey folder. Then install ControlMK and put the pro. file into the ControlMK folder. Then run ControlMK. In ControlMK select the Xbox 360 gamepad in Controllers Found, Then in activate controllers select the Xbox 360 Gamepad Ive just recently dl AutoIt. I usually create batch files or windows shortcut files to automate everything. In using AutoIt how would I get this code to run? C:\Program Files\GameEx\JoyToKey.exe psxdc.cfg This is a shortcut I created to JoyToKey.exe. It launches the program with the config file n.. So if you don't have JoyToKey, I suggest you download it from the official site: joytokey.net. No need for instalations, it's just a zipped folder with the .exe inside and some config files. Since the file format can't be attached here, you'll have to create a notepad file in the same folder as the .exe with the name blah.cfg (where blah is.
Penumbra is a first person horror adventure focusing on story, immersion and puzzle solving. Violence and combat is hardly an option - the player has to use wits to guide Philip through his final test, and this makes the series unique in offering a truly dangerous and terrifying experience To make this easy you will want to cut and paste the content below starting on line 490. You may want to open the file with a free program like notepad++ so it is formatted easy to read. This is the configuration that works with our control kits, again paste on line 490 in the cfg file, then save it back to the pi I've been seeing a lot of topics about which controller to get, button controls, ect. So, I thought I'd share the program I've been using for all the games I play with my Logitech controller. I'm not the BEST teacher in the world, so bare with me. T.T;; I'll organize this as best as possible. Sorry if your screen is being stretched! Let's Get Started JoyToKey Now, what this is is a keyboard.
Page 2 of 2 - JoyToKey Profile - Xbox 360 or Xbox One Controller - posted in File topics: The triggers make me look around not sure why The app allows you to make multiple configuration files to switch across different key/mouse assignments. A great feature of JoyToKey is it supports automatic association with target apps, so that the config file will switch automatically when the target app changes.Key features include: Virtual joysticks. Button alias I need a file for minecraft xbox one controller config. Those that I have found are broken Help Sign In/Register. Minecraft Forums. Advanced Search Anyone have a Joytokey file they can share me . Search Search all Forums Search this Forum Search this Thread Tools Jump to Foru JoyToKey is a fully-featured free keyboard emulator that allows Windows users to control their mouse or keyboard inputs using the buttons and thumbsticks of their game controllers.This is especially useful for a wide variety of games that are built without full gamepad support, which includes numerous web games, standalone game applications, console emulators, and other apps